C10L-AP Lid, Absolutely a must if you buy the matching sous vide container.

Like all the lipavi products, this is effective flawlessly and fills a operate that is hard to replicate if not, but the rate is a small large. Lipavi seems to know what they are undertaking, having said that, as it is accurately the most i would look at spending for this, and not a penny additional. Functions nicely to keep steam and evaporation contained and your h2o stage high. I have long gone via roughly 24 hours of sous vide time across quite a few weeks with no refilling the container.

Matches perfectly about my anova sous vide.

A minimal expensive for what it is, that’s why only the four stars.

Key specs for C10L-AP Lid for LIPAVI C10 Sous Vide Container, with cut-out for the Anova Precision immersion circulator:

  • Enter your model number
    to make sure this fits.
  • C10L-AP Fits Anova Precision in LIPAVI C10 Sous Vide Container
  • For Anova One use lid C10L-AO
  • Crystal Clear and Strong Polycarbonate
  • Prevents evaporation and conserves heat
  • High temperature tolerance, from -40 to 210 F

Comments from buyers

“It’s a great lid., Necessary add on., Absolutely a must if you buy the matching sous vide container., Expensive, but useful, A must for the sous vide aficionado!, but it seems to take the heat just fine. I bought this in conjunction with its matching “

Satisfied my anticipations – indented handles make it quick to position/eliminate , slot accommodates my anova sous vide product.

This unit cooked three pounds of state style. This unit cooked 3 pounds of nation design ribs with out any issue. I am so amazed with sous vide cooking, and the lipavi built factors even nicer.

This lid matches the lipavi design c10 sous vide container completely, and the cutout is the great measurement for the anova precision cooker (both equally bluetooth and wi-fi). The lid seems to entice heat in greater than cooking uncovered, which indicates that it takes less time to carry your h2o tub up to temperature. If you’re going to purchase the lipavi container, you could as perfectly buy this, also.

Is effective excellent on the c10 container.

Should have been sold with the container at a decrease selling price.

Matches correctly on the ontainer and functions the exact same with the anova sous vide.

It will work substantially much better than the pot/aluminum foil combo i was beforehand trying. Matches properly with the sous vide container and my anova bluetooth/wifi cooker. It does feel a bit pricey for the small total of plastic, but i believe it was a worthwhile invest in. It operates significantly much better than the pot/aluminum foil combo i was earlier attempting.

Operates correctly with the anova sous vide products.

Lid functions fantastic to maintain water from evaporating. Ran ribs at 165 levels for twelve hrs no real loss of water.

Matches my container flawlessly and my anova sous vide matches. Suits my container correctly and my anova sous vide suits correct into the slot. Commit the income and get the bin and address. The heat loss without having it improves cook dinner occasions and those ‘balls’ are just foolish.

Performs good – a required addition. Acquired to have this if you have the 3 gallon container.

Suits about the anova properly and will help limit evaporation. Just what i was searching for and provides on expectations. A very little pricey but worthy of it if you plan on cooking sous vide a large amount.

Good addition to my sous vide cooker.

I highly advocate this lid paired with the tub the exact corporation. This lid is tight fitting all over the anova machine and minimizes evaporation when accomplishing prolonged cooks. I have clamped the lid shut and finished 24 hour cooks and not had to insert h2o. I really advocate this lid paired with the tub the very same company sells.

Labored as it really should with the container.

In shape nicely on my sous vide container and anova. Did a forty eight hour cook of corned beef with very minor, if any, h2o loss.

A need to for the sous vide aficionado. You want this if you are undertaking any variety of sous vide. It allows to keep the temperature consistent (i cooked beef shank for 4 times with the address on and no reduction of water). Nicely produced and truly worth every single penny if you are an avid sous vide person.

Fully priced but meets the will need. Astonishingly, held heat and diminished evaporation as promised. The cutout is slightly cosy with my anova but thorough alignment throughout withdrawal would make it work.

But it looks to take the heat just fantastic. I bought this in conjunction with its matching. Rarely the most romantic item, this is a polycarbonate lid for a polycarbonate container. I have not undertaken to screening the toughness properties of polycarbonate, but it appears to take the warmth just fantastic. I bought this in conjunction with its matching container and rack, as perfectly as the anova cooker, a vacuum sealer, and numerous rolls of bagging content. Assembled with the container, rack, and cooker, it can make a handsome assertion on my kitchen area counter. Most importantly, this lid keeps the drinking water and heat in. It fits easily into location, and can be taken out just as conveniently to area and take away the food items.

Made use of with anova culinary pcb-120us-k1 bluetooth precision cooker, blackand lipavi sous vide container model c10 three. 3 inch – matching l10 rack and tailor-made lids for quite a few circulators offered separatelyand lipavi sous vide rack – model l10, stainless metal, square seven. Adjustable, collapsible, makes certain even and swift warming with sous vide cooking. Matches in the lipavi c10 polycarbonate h2o tub in mixture with anova, nomiku, sansaire and polyscience chefits a lid works as meant.

Does the career with no acquiring to utilizing foil or another way to seal the container.