Inkbird Universal Dual Digital PID Temperature Controller, Good but Not Without Some Issues

Excellent fundamental device but be thorough not to press way too really hard on the screws when you tighten them. I pushed the again plate in when i did this. I did press pretty difficult so not sure it was the models fault.

Controller will work nicely, all contents had been supplied and uncomplicated to hook up.

Utilized it for a controller in a do-it-yourself sous vide and it is effective excellent. Display is simple to read through and performs as anticipated. Be confident to established the suitable thermocouple type.

Key specs for Inkbird Universal Dual Digital PID Temperature Controller + K Sensor Probe + 25A SSR Solid State Relay for Home Brew Hatch Aquarium Freezer ECT:

  • Enter your model number
    to make sure this fits.
  • 1.Support multi sensor input (K, S, Wre, T, E, J, B, N, CU50, PT100)
  • 2. Temperature controller + K sensor probe + SSR-25DA State Relay
  • 3.Built-in digital filter reduce interfere
  • 4. Self calibration technology, keep stabilization
  • 5. Tow OMRON relay output

Comments from buyers

“Easy reliable PID for a GREAT price!, Good but Not Without Some Issues, Overall I’m happy with the performance of the unit”

Great operation products.

Performs wonderful as it was intended.

It is really set up to management heaters in an outdoor enclosure. I have it configured in pid handle manner which will work good.

Wonderful pid temp controller for an wonderful selling price. Labored fantastic, the auto-tune function genuinely assisted in my venture owing to the quick heating.

I would give more stars if the instruction had been in comprehensible english. This is an straightforward to operate pid controller and appears to operate as predicted but the documentation is awful. Especially, the part about how to do an autotune a second time is fully difficult to have an understanding of. For my present-day use i can use the default pid (there is no point out if you can edit these specifically or if you can only use the default or autotune) so i am not concerned for this use but for other folks i may possibly want to autotune or set the pid directly and will need distinct instructions. Also, the integrated thermocouple is a pice of garbage and broke immediately when making an attempt to screw it into a mating part. It was machined with a extremely weak location and broke instantly with out overtightening.

Works like the last one i purchased, no complaints.

Will work properly and straightforward to set up and software. I purchased two and both equally had been excellent. Only difficulty was that the mounting bracket for just one of them was a little bit too compact and would not slide over the unit like it is built to. I had to use a dremel to shave down the inside rim to make it in good shape.

I utilised this to turn an more mature oven into a curing oven for cerakote, sturdy, and heating kydex. I do advocate purchasing the lengthier probe but in the tiny oven i’m using the 1 it will come with is just high-quality. I was a very little puzzled by the wiring they prompt, but involving you tube and the inkbird web-site i was profitable.

General i’m happy with the general performance of the device, but i believe it could be improved. I acquired this to make a sous vide controller, and for that purpose it worked quite perfectly. It held a temperature inside of +/- . That currently being mentioned, there were being a couple of issues that impacted the rating. Pros:- held a quite stable temperature for a long time. – relay was able to continue being on for long time in the course of initial heat up and did not have any troubles with the on/off duty cycle- cheapcons:- i could not get it to run the automobile-tuning technique as per the included guide. Luckily for us the default pid parameters worked fine for my functions, but if i change something about the setup then it could be an difficulty down the road. I have manually tuned pid controllers ahead of, and it’s not exciting. (-1 star)- mounting clip is uncomfortable to use and hard to tighten down once attached to unit.

I acquired this to build a hotplate controller. The 1st difficulty i encountered is the sort factor. The top is these types of that getting a acceptable enclosure is a problem. If it was broader and significantly less tall (the warmth sink would also have to be a decrease wider structure as nicely) you could use just one of the a lot of small-expense pcb board enclosures offered. The next challenge i have is the logic made use of for changing values. When you push and hold the worth transform button the temp adjustments extra quickly but it would not modify by full degrees, it improvements by tenths. That means it will take about a second to modify the temp by one diploma. To make a a hundred diploma modify in temp you have to keep the button for over a moment and 50 percent, that’s a long time. Also the default for the hi-alarm is 1000 levels, so if you want to set it for say a hundred and fifty you have to make a 850 degree modify. Though it variations in entire levels it is still painfully slow and will choose minutes to modify.

Awesome, as other have posted, the directions are lacking, but it is effective pretty perfectly. I flipped it with a pt100 sensor, which you have to established up accurately. Pid ‘remembers’ after energy off, so retain that in intellect. Retains 14 gallons of liquid in a. 3 deg c temp array, couldn’t question for much more.

Procured for messing all around with fermentation management. Really large discovering curve and i have established it aside for now going back to my johnson a419’s. Will probably mess all-around with it in the future.

Works as envisioned use it to operate 1800w of heating elements.

The controller and solid state relay worked specifically as marketed. As the encounter of the controller signifies, this controller shows temperature in degrees c, not f. I wanted a controller for a compact location and the shallow depth of this controller served.

It works to keep the temp in the ballpark, but i have not been able to control temps as precise as i wanted.

Ssr did not function had to buy a different a person to get it up and working. But i guess for the selling price what must i expect. They transported me a comprehensive setup and every little thing work terrific.

Worked best would purchase once more.

These get the job done brilliant for the cost, some of the functions from larger rate pids are lacking, but not essential if i just want a steady temperature. I wired up a lot of of these and they stabilize the rope heated pipes speedily and hold the temperature properly in an appropriate range (. 5°c) of the goal temperature. The recommendations are distinct more than enough for an individual common with pids to wire with no problems, but if you’ve got hardly ever wired a temperature controller you might find the directions a minor quick. I will buy once again when i require far more temperature controllers.

Is effective great, i’m applying for drinking water bathtub temperature handle in a yogurt maker. Really uncomplicated to setup and it is really been reliable so considerably.

Initial the recommendations are most unquestionably not crystal clear, if in question go to youtube and look at the inkbird video for this controller and then be aware that if you wire the thermocouple that is included with this offer as the video clip shows, it will not do the job. Element of the difficulty is this non-english speaking enterprise has a number of different goods and alternatively of acquiring an english speaking technological writer to set alongside one another specific directions for a unique item they apparently have attempted to merge breif guidance for quite a few items together. I invested very a bit of time and annoyance trying to get this device to get the job done as the movie had revealed. An electronics engineer was able to just take breif glimpse at this controller and proper the mis-wired thermocouple. What i discover tricky to imagine is this corporation continue to has this online video posted as a guide for setup, which is just basic wrongi have skipped my window to return this products and have not been able to get this controller established to operate as meant. Luckily, the electrical engineer mentioned he will glimpse around the controller’s documentation and see if he can support, but that is assuming this thing is not faulty. Unless of course you are already acquainted with pid’s, which i am not, i would surely uncover a different pid controller to acquire a person that has acceptable and accurate directions or has more than enough end users that you could be equipped to get some support. Update: after shelling out significantly time on the online, studying and reviewing the workings of other pid’s i last but not least was equipped to get the inkbird wired in and established into a kitchen area oven, which will now be a retrofitted committed powder coating oven. The pid is working exceptionally very well at holding a constant temperature, so i am revising my rating upward centered on the functionality of the product. Even so, with excellent instruction this whole system could have been streamlined and manufactured so quick.

Labored out of the box for me. Directions challenging to follow. If someone re-wrote the recommendations in indigenous english the solution would be value $ten far more.

Review Date
Reviewed Item
Inkbird Universal Dual Digital PID Temperature Controller + K Sensor Probe + 25A SSR Solid State Relay for Home Brew Hatch Aquarium Freezer ECT
3.8 of 5 stars, based on 66 reviews