EdgeStar BR2001BL Ultra Low Temp Refrigerator : Different tower needed

Overall good fridge for keg conversion (fits 2 corny kegs). Overall good fridge for keg conversion (fits 2 corny kegs). Kegco double tap tower fits perfect. Only real issue i have is that i have a double regulator setup and the penetration through the back of the fridge for the gas lines is only big enough for one line to fit through which means the co2 tank has to be in the fridge with the kegs. Also, it’s a little bit loud when compared to my kitchen fridge.

Keeps beer cold and has ample room for two slim kegs.

Had this frige for a while now works really well and gets really cold.

Lots of fun – great product. So happy i bought this – even though it was a kind of. It’s been so fun to have though. My only suggestion would be to get a unit that has all the parts included – i think in the long run you’ll save some money. All my friends think it is the coolest thing – my apartment is the spot right now haha. It’s very well made, and the instructions included are so detailed that it makes putting everything together a quick and easy task. My only complaint is that the co2 tank hangs on the back of it, which prevents it from being more flush with the wall so it sticks out quite a bit.

  • Really nice refrigerator at an excellent price.
  • Home pub up and running
  • Won’t hold temperature with recirc fan in it. Not

EdgeStar BR2001BL Ultra Low Temp Refrigerator for Kegerator Conversion

  • Enter your model number
    to make sure this fits.
  • Temp Range: Low 30’s to Mid 40’s; Casters for easy mobility;
  • Store up to a full sized half shell Sankey standard keg.*Does not support use of Coors, Miller rubberized or other oversized kegs.
  • Reversible door; UL listed; Protective floor plate for added durability
  • Freestanding use only; Weight: 81.6 pounds; 115 Volts / 60 Hertz, 105 Watts, 1.5 Amps
  • Can be converted to a fridge only with the included tower hole cap

We bought this because we already had all the parts (double tap tower, lines and tubing, c02 cylinder, etc. From an old kegerator we had) this is basically a small fridge with the holes already cut out for the fittings which is very convenient if you are not handy or do not want to fool with doing it yourself. We have one tap hooked up pin and ball locks to use the corney kegs for our home brew (these are the old 5 gallon stainless steel tanks the soft drinks companies used to use for fountain drinks before they switched to bags of syrup, and a “d” coupler hooked to the second tap so we can use commercial 5 gallon tanks as well. That way we will always have one of our homebrews, and a store bought beer on tap at all times. The kegerator will hold two 5 gallon kegs at the same time according to the manufacturer but we have not actually tried it that with two at the same time yet.

Perfect for my two cornelius kegs.

Perfect to replace old keg fridge that died. Steam matched right up, easy set up. Keeps beer just above freezing just the way i like it. Adjustable shelves hold a lot of back up beer with 1/4 barrel underneath. Appears it will hold half with no problem with shelves out. I am done lugging those down a flight of stairs into basement tho 🙂 i ordered this on christmas day. Emailed the company the following sunday and got immediate response from seller. I wanted it in time for new years. They could not promise shipping but took the time to respond.

Works exactly the way it is supposed to by providing ice cold beverages.

No issues with fit at all and i am very happy. Fit’s 2 5 gallon homebrew kegs (and has room for bottles) after 3 days of operation i am at a consistent 36 degrees. It was installed under my bar so i also put my co2 tank on the inside (vs mounting on the back) and left the rails off. Insulated and ran the 2 lines lines through the top of my bar tower. No issues with fit at all and i am very happy. 5 inch insulation did not allow me to run my tower chiller but with as cold as it gets i don’t even need it.

Hopefully this one lasts more than 3 years.

Great kegerator for kegs/homebrew. Good temperature control, and i can’t even hear it running. My 3″ tower only needed four 1/2″ 10-32 machine screws to mount (threaded holes do not go through to the inside). I highly advise upgrading to perlick 650ss flow control faucets unless you don’t mind wasting beer.

Worth it for a diy keggerator. . Bought this to assemble my own keggerator set up & it’s a great unit. Keeps temp & gets cold enough for good pours.

This works great and i have been very happy with how it. You can’t beat the quality for the money. This works great and i have been very happy with how it holds up in an very hot outdoor climate. While ice can sometimes build up inside, it easily defrosts and has been a great product. This is my second one that i have owned and both are very good. There is no reason to pay more for something when this is such a great value.

My old kegerator died, and i can’t imagine something that would have worked better to replace it. It took about five minutes to move the hardware over to this one. And it takes up a little bit less space than my old one, so that’s nice.

This kegerator arrived on time and in excellent condition. Saved quite a bit by buying the. This kegerator arrived on time and in excellent condition. Saved quite a bit by buying the replacement fridge and adding a separate 2 faucet tower. The info says you have to drill new holes if you buy a 3 inch faucet, but mine lined up perfectly. The reviews from the other edgestar kegerators said the thermostat sometimes needs to be reset, but mine was perfect from the start, easily holds at mid 30’s without dialing all the way down. What the other reviews don’t mention is that this thing is so quiet. Mine is in a sun porch with bad acoustics, and i barely hear it except when it thunks on and off. This set up easily for my homebrew kegging, loving it.

This is a great kegerator for the price. . This is a great kegerator for the price. It’s nice that the co2 tank has a holder on the back of it outside of the fridge so it doesn’t take up space.

Only issue that would make it superior is to have the capability to run two gas strains into the device.

Not hefty obligation, but serves goal. I have two cornelius five gallon soda kegs in it and they fit effortlessly. The nameplate on the entrance did peel off with the ‘protective coating’. Not a issue as significantly as i’m concerned.

Matches 2 corny kegs, has pre-drilled hole for co2 line with bottle mount on the back again. Pre-drilled holes with threaded inserts and components for mounting tower.

Is effective good could not be much more delighted, burney berman you did it again.

The frig came speedily and was not a whole lot of problems placing it together. On the other hand, we had planned on employing our old tap from our old beer frig that died. Unfortunately it took numerous telephone calls and orders and returns to get a new just one that was the proper measurement. This frig requires the much larger 3 inch tower not the 2.

I am working with it as a refrigerator and it will work like any large fridge. I am applying it as a refrigerator and it works like any significant fridge. I use it to place lower flowers in at night time, so my slice flowers now very last two months and longer fairly than the regular 3 or 4 days. The motive i acquired it instead than a different modest fridge is for the reason that it has much more interior house. The motor won’t arrive as much into the fridge as in others tiny fridges because it is manufactured to keep the bear keg. And there are no cabinets on the entrance door which also gives much more inside home.

Summary
Review Date
Reviewed Item
EdgeStar BR2001BL Ultra Low Temp Refrigerator for Kegerator Conversion
Rating
5.0 of 5 stars, based on 41 reviews
Price
$319.00